Free wardrobe and shelving cut list calculator. Enter your measurements and get a drawing, an exact cut list and the number of MDF or plywood sheets to buy. Free, no sign-up.
Tap one to add it to the highlighted space, or drag it onto the drawing.
Tap an empty space to choose where new boards go. Drag any board to move it.
Orange dashed lines are saw lines, measured from the top-left corner of the sheet. Saw on the waste side of each line (the blade removes the kerf set under sheet options), so every piece keeps its full size.
It depends on the size and how many shelves and doors you add. Enter your measurements above and the planner packs every piece onto standard sheets (2440 × 1220 mm by default) and tells you how many to buy.
Yes. The blade removes a strip of board with every cut (3 mm by default), so pieces are spaced out on the sheet to leave room for it. You can change this under sheet options.
Yes. The sizes only depend on the thickness you enter, so it works for MDF, plywood, chipboard or solid timber panels.
Yes. Sides run the full height, the top and bottom fit between them, and shelves and dividers fit between the boards they touch, so the cut sizes already allow for board thickness.
It is free. Your measurements stay in your browser and are not sent anywhere or saved. See the privacy page.
The planner gives sizes for guidance. Always check measurements against your own room and boards before cutting.
Skip the sawing: order your pieces cut to size and delivered.
This is an affiliate link. If you buy through it we may earn a small commission, at no cost to you.